Skip to product information
1 of 6


eSUN PLA+ Filament 2.85 mm 1kg (2.2lb)

eSUN PLA+ Filament 2.85 mm 1kg (2.2lb)

Regular price $ 24.99 USD
Regular price Sale price $ 24.99 USD
Sale Sold out

Note: Sealed bag only means a good sealed spool will be shipped without the product box or with a damaged product box
Advanced formula.  Superior than all PLA on market.

The newly added mixes are also bio-polyesters and the the PLA+ is still 100% biodegradeable.
Major differences between PLA+ and regular PLA:
Elongation At Break:  PLA+ 29%   Regular PLA 5%
Izod Impact Strength:  PLA+ 7KJ/m2    Regular PLA 4.2KJ/m2
As you can see the Toughness of PLA+ is superior than regular PLA.
Colors available:
Black, Cool White, Warm White, Red, Blue, Brown, Gray, Peak Green, Magenta, Yellow, Skin, Pink, Orange, Gold, Silver, Pine Green, Light Blue, Purple


Added extra bio-polyesters blends. Still 100% bio-degradeable.

On top of existing PLA performance, greatly improved the materials’ Fracture Toughness. Print much smoother. No warp or layer breaking problems. No brittle issue.

Prints about 20 Celsius higher than regular PLA.

Printing Parameters

Best Printing Temperature:210-220℃

Bed Temperature:0/65℃

Printing Speed:30~90mm/s

Movement Speed :90~150mm/s

  • Actual Diameter 2.85mm +/- 0.05mm
  • Reinforced spool with bigger inner diameter to allow smoother pull from extruder, unlike most black spool on the market which has a tighter inner diameter.
  • Non harmful, non-toxic, and environment friendly
  • Low material shrinkage rate, uniform diameter +/- 0.05mm
  • Greater selection of colors to choose from.
  • Bio-Degradable
  • Guaranteed Customer Satisfaction



    View full details